Incompatible Wood Products: Signs and Diagnosis Before Treatment
In a restoration workshop, recognizing the signs of incompatibility in wood treatments can make the difference between a successful and a failed restoration. This article focuses on the symptoms and causes of incompatible treatments, such as the use of silicone products and polishing detergents that prevent the adhesion of natural waxes and oils.
Identifying Symptoms of Incompatibility
Wood treated with silicone products can show obvious signs of incompatibility: patchy spots, a slippery finish, and areas where wax or oil does not adhere. These symptoms indicate a failure of natural treatments to adhere, preventing the wood from “breathing” properly.
Causes of Adhesion Problems
Residues of silicones and commercial detergents are the main culprits. These materials, often used to polish furniture, leave a film that hinders the application of more natural treatments. Old incompatible products can also contribute to these problems.
Diagnosis: How to Recognize the Problem
To diagnose correctly, it is essential to understand the history of the piece. Knowing previous treatments can provide useful clues. In the workshop, small tests on hidden areas can reveal the presence of silicones or other residues.
- Observe the surfaces for unusual spots or finishes.
- Perform a test with a damp cloth to check for the presence of silicone films.
- Consult the surface treatment history for any past incompatibilities.
Did you know that? Silicones are often used in commercial products to give an immediate glossy appearance, but they can compromise the subsequent application of natural treatments.
The Next Step for Your Restoration
Once the problem has been identified, the next step is the removal of incompatible residues and the preparation of the surface to receive natural treatments. Always test a small area to check the compatibility of the new products. Explore the solutions offered by Kit Little Garden for natural treatments, discover our wax-based products or visit our blog to learn more about our values and restoration methods.
0 comments